In flexible wall yurts – the most popular designs – the outward stress is counterbalanced by a line of aircraft wire strung through the vertical wall lattice, and tensioned using a turnbuckle system. The rafters notch into this cable, pressing outward in a uniform manner. Because of the circular shape, every resting point of the heels of the truss chords applies equal pressure, and thus, each truss offsets each other truss. At the apex of each chord, the rafter ring bears the weight and pressure of the upper end of the truss, equally and counterbalancing each other truss. This design is simple, but its simplicity means that there is a maximum diameter of yurt that can be built.

Solid wall yurts have both drawbacks and advantages over the lattice wall design. While they offer greater protection from exterior elements, the ability to be designed taller than lattice wall units, the flexibility to incorporate conventional doors or windows and the capacity for greater insulation, they also have the drawback of being built in a multitude of wall segments, as opposed to the continuous wall format of lattice walls. Solid wall yurt systems require, because of the individual wall panels, supplementary structural support.

When designing my solid wall yurt, I incorporated not one, but four rafter support concepts.

The first was the conventional aircraft cable, strung through the heels of the rafter chords (reinforced with a metal ring, to prevent cutting through the wood of the rafter. Secondly, I used hurricane ties on each chord heel. Thirdly, I nailed steel mending plates at the top and bottom of each joined segment.

The fourth concept provides unique structural support for the walls, offers exceptional wind resistance, and ensures that the rafters do not place excessive force against the top of the walls, causing them to bow outward.

My yurt is twenty-eight feet in diameter. Using forty-four two-foot wide panels, I placed each panel at an eight-degree angle to the adjacent panel (resulting in 352 degrees of curve, rather than the full 360). By using 2 by 6 studs and cutting an eight degree “V” shaped 1.5 inch wide, I was able to generate 12 top plate segments from each eight foot length of wood. Each piece has two arms extending from the apex of the “V”, with each arm twelve inches long.

These pieces are nailed on top of two adjacent panels, with the “V” placed precisely where the two pieces meet, and extending one foot into each panel. They are secured with three nails in each arm. As added reinforcement, I used the same system as the bottom plate for the walls.

This unique top and bottom plate system has worked exceptionally well, with the yurt enduring wind gusts of 115 kph (73 mph) without any problems. In fact, in 2011, shear wind toppled a tree with a trunk diameter of fifteen inches, less than 100 feet from the yurt. The yurt barely quivered! 2010 winter snow loads failed to bend or bow any of the truss chords. Although I clearly have implemented more structural reinforcement than is normally required, the strength of the design provides comfort and reassurance in the harshest weather.

What Needs Do You Have?

One of the biggest questions people ask is about the services used. What should you be using in your home? This will depend on where you are located and the current condition of your home’s system. For example, you may need to consider residential treatment in some areas. Some people will benefit from the addition of water softening. Still others will need a reverse osmosis to see improvements in both the quality and the availability in their home or place of business.

How to Find a Professional

Finding someone who can work on these systems is easy enough to do. However, you should seek out a professional you can trust to do a great job. There are several ways to do just that.

- Look for a company with extensive experience in the type of systems you are using or that you need to have installed.

- Be sure to talk about the specific installer or technician’s experience — not just the experience of the company.

- Find out if the company not only offers installation and repair work, but also provides ongoing maintenance of the types of systems you have in your home. This preventative maintenance can often save you a significant amount of money.

- When can they come to you? What is the cost for the service offered? You will want to ensure the company’s customer service level is where you need it to be to really feel as though you are getting the results you need.

- Finally, check out the company’s reputation. Are they known in your area for being trustworthy and doing a good job without charging too much? You can often research companies online, too.

The more you know about the company, the more likely you will find the one to help you to get the right system in place and working well. The water systems that keep your home or business working can be complex and knowing what your needs are can be hard enough as well. Yet, with the help of the right company, you can make significant improvements in your current setup and even save some money in the process.

When you do the decoration, you must remember to make use of bright colors. Well, bright colors are usually warm colors, and you do not want to have warm colors in your bedroom during spring. Basically, you need to make sure that the colors that you use are cool colors. Basically, light blue or light green would be ideal colors.

For the covers, polka dot covers are highly ideal colors because they instantly brighten up any space. Furthermore, the duvet will protect your beddings from being dirty through dust or sweat. With the proper combination of duvet color and wall color, you will be able to create a very cool room.

As we have already mentioned, painting the room is one of the best ways to freshen up the room. Painting the room is also preferred by many individuals and home owners precisely because it is a cheap. However, it is important that you know what paint to use and what color combination to employ. As we have said, bright and cool colors, accentuated by heavy colors, will make the room look fantastic.

Now, the redecoration is not to be limited to the colors alone. Your redecoration must involve the rearrangement of some things, and also the elimination of other useless items. Unused toys of your kids really mess up the place. So, by placing them in a single container, you actually de-clutter the place a great deal. These containers do not need to be dull. Since you are redecorating, you might as well recolor the containers in order for them to be in harmony with the wall colors. Most importantly, they should be patterned around the color of your bed as well as your duvet.

The closet, too, must have a bit of a modification. Basically, the closet largely influences the overall look of the room. It is suggested that you create a closet with two levels. This would allow for more contents, and it would look good, too.

Decorating your bedrooms need not be that toxic. Given the right information, you will be able to do it with ease and satisfaction.

After some research we found that Low Power PC has been introduced by some people around the world and has been a great success. It has a saying that its energy costs reduced 60% of the current energy consumption. So a Low Power PC can be a great revolution for the people and countries.

Its not just about the power consumption, but they are also the cheapest found on market. If people are really concious about the energy and the money then, I suggest people surely should get a one. I have order a piece for myself, as every good things should be started from ownself.

Save energy, Save world – Go green.

1. Wash the fabric: Because unwashed sewn fabric can shrink or rip when you put it in the washer and dryer later on, you should wash the fabric you choose beforehand.

2. Measure the pillow: Take measuring tape and stretch it across the curve of the pillow. Once you have your measurements, add a quarter to a half inch on each measurement to ensure that you have extra fabric. It’s always better to have extra fabric left over than not enough!

3. Cut the fabric: Cut the main panel fabric to match the previous measurement of length. Add a half to one inch to the height and width. Cut another two pieces (small panels) that are roughly your length minus about 6 inches and the same height.

4. Sewing: Place your main panel fabric right side up and place one of the small panels the opposite side up at the edge of the large panel. Once these are placed, pin down each side about 1 ½ inches in.

As for hemming, place the cloth with the right side down on the ironing board. On the outer edge of each small panel (one first, then the other), fold the fabric 1 inch so you can see a small strip of the right side. Start ironing!

Once you finish pressing the fabric neatly on, sew these sides up using a 1/2 inch seam allowance and lay the fabric the right side down and iron the inside seams. Flip the fabric over again and fold over each small panel and iron thoroughly again.

5. Final Touches: Once you pin the top and bottom of the fabric about 1-2 inches from the edge, sew the top and bottom seams with the same 1/2 inch seam allowance at each end of the fabric. Cut each corner diagonally across so that each edge will no longer be a square. Finally, push out the corners and place your pillow inside its new cover!

For some reason or another, circumstances may give you no choice but to stay at someone’s house. It might be a family member – distant or close- or a close friend. In all cases, there are certain guidelines you should follow to be a decent house guest. Some are instinctive and well-known, but some may slip your mind.

First and foremost, this is not your house and the biggest issue that comes along with an extra person is the extra cost. As much as you can afford, offer to buy groceries especially if you need things or food that your host does not consume. Use water and electricity wisely and go easy on the phone and the internet. It is cheaper and easier for you and your host if you bring as much of your belongings as you can. Bring along your favorite pillow, your own toiletries and NEVER use anything from other people’s things without permission, no matter how minor you think it is.

If you are a student, unemployed or simply “need the money”, you may not be able to help financially. Yet, there’s a lot to do to be a welcome and helpful guest. You need to make sure you don’t load them with any effort. Wash your own dishes and prepare your own food. Do your laundry yourself if possible, make your bed and arrange your room. Offer to help with their housework as well if you can. After all, your hosts will really like it when you become an active member of their household, even if your stay is temporary.

However, it is not always and not only about money or effort. It’s about what you do and how you act. Being polite because you are a guest does not mean being silent and confined to your room/space. Try to make a difference and show your good spirit. Take a part in the general talks going on; say as much as you want about yourself, studies, career and/or other current activities. Tell jokes, watch movies and play games with everyone else. It will make your stay more enjoyable for you and your company and will bring you closer and closer to the people you love.

Remember that what’s more important than adding a spark by your presence is avoiding causing any disturbance. Do not play your music loud, especially if there is someone studying or a baby in the house. Dress appropriately and take care of your general appearance. Give your host and his/her family space so they can talk about matters that don’t concern you without being embarrassed. If you share the bathroom, do not take ages inside, especially in the mornings when everybody else needs it.

Make sure you leave behind a good impression. Give them a “thank you” gift or flowers before you leave. It would be a gesture of gratefulness and will be greatly appreciated.

With so many fall events that take place, having great fall flyers to advertise and promote them are only natural. The great thing about themed flyers is they fit in with so many types of events like school fund raisers and even church socials that you will always be able to find ones that suit your needs perfectly. With cool looking flyer blanks, it doesn’t matter what you need them for, you have the ability to custom design everything about the flyer so they not only look great but will provide everyone with all the information they need about the upcoming event.

With these great tips for sprucing up your fall flyers, you’ll have great looking flyers in no time.

Purchasing flyer blanks then downloading the appropriate template for your favorite word processor gives you the ability to set them up exactly how you want.

One way to add more “pop” to your seasonal flyer is to place photographs and graphics on them to visually stimulate the reader. Well placed graphics can actually draw the eye down the page ensuring they look at all sections of the flyer information.

Flyers with leaves, almost bare trees, fall colors and other fall concepts fit with any event taking place during September through November and can even be used for Thanksgiving events. This means you can buy one style of flyer and can use them for multiple events, even for Halloween.

If you are mailing out flyers instead of posting them, there are lots of great fall themed envelopes that look great to mail them in.

Another great way to mail flyers is to fold them and use fall themed envelope seals to hold them closed. Not only is this an inexpensive way to distribute flyers but they look great too.

Using fonts with a leaf shape, especially for headlines and headers are also a cool way to add extra glitz to your fall flyers.

Having great flyers is a perfect way to inform people of your upcoming events. People will definitely notice your wonderful advertising choices including great fall colors and themes. Once you have their attention, your event or business is only one more step away from a new customer. For fund raisers and other events where public participation is desired, nothing draws in the crowd more than eye-catching promotions. Fun fall themed flyers are always a great start to a successful event.

Think about the one thing that we do every day and have done since the day we arrived on this good Earth? We age of course. Every day we get one day closer to being old. The definition of old changes to us, of course, as we age. In our teens we think twenty year olds are so mature and old. By the time we are in our twenties, we are experiencing our first job; thirties we have the family and by our forties we have resigned that old is still really far off.

The truth of the matter is by the middle of our life we need to start thinking about the last stage and part of that has to do with aging and how to stay independent and living on our own for as long as possible. With this comes a new territory to explore newly termed aging in place. What this refers to is the fact that many people are aging well into their nineties and many people do not want to burden their children will the responsibility of caring for an elderly parent.

As we gain speed slipping fast into out golden years it is important to begin remodeling the space we live in with our future needs in mind. For many of us this means that remodel projects start to include aging in place features that will allow us to continue to move about the home freely and safely. The goal is to make sure that the home that we age in is safe for us, provides minimal maintenance and transcends into more barrier free living space. There is a host of things to consider while aging.

Entering and exiting the home needs to be safe and secure.

Better and brighter lighting is needed in garages and spaces where the vehicles are parked.

Threshold ramps should be installed to provide a zero step entry into the home.

Handrails should be upgraded and be provided on all entrances and exits of the home. Upgrades should consist of heavy duty materials and hardware that will hold up without loosening with extreme use.

Kitchen changes to ease access for preparing meals.

Faucets should be equipped with easy to use levers and an easy to use pull out nozzle. This may come as a surprise but someday in the future it will be more convenient and easier for hair to be washed in the sink.

Shelves that pull out should be incorporated into the kitchen design. This eases back discomfort and back breaking bends.

Refrigerators can be upgraded to allow for shelving to be pulled out.

The knobs on the kitchen cupboards and drawers should be larger and easier to grab onto.

It is so easy for an accident to happen in the bathroom.

Grab bars that are attractive yet fill the aging in place need should be installed in the shower and by the toilet.

Faucets should again be levered, as is true in the kitchen, this helps with stiff joints that don’t turn or grasp as well as they used too.

Showers can be modified to contain a sitting area and shower heads should be changed to removable ones that help get areas that normally are hard to reach for someone with limited mobility.

Toilets can be purchased at a higher height to provide comfort when trying to stand.

Moving in general around the home should be made easier with each renovation.

Make sure doorways can accommodate a walker. This means doors should be a minimum width of thirty six inches.

Add extra lighting throughout the house. Eye site tends to get poorer as we age.

There are many aging in place changes to make as the aging process happens and starts to turn us into people we know longer recognize. Pretty soon we stop thinking about what is old and start thinking about the fact that when we were fifty we were so young and able to do so much. It’s funny how age affects our frame of mind.

Hiring a professional carpet cleaner is a monumental task. At some point this is a job homeowners with carpet flooring will have to tackle. At what point does this become important? If a homeowner finds themselves fighting daily with dingy carpet it is time to call in the professionals. A deep cleaning is recommended every twelve to eighteen months. Many homeowners try to tackle it themselves with very little success. Carpet cleaning is an issue that should be dealt with by a professional to ensure a quality job is done each and every time.

How does a homeowner go about finding a professional carpet cleaner in their area that is highly qualified and budget reasonable? There are a few tips to live by when letting any “professional” into your home. As with anyone care should be taken to make sure a licensed, trained, qualified technician cleans the carpet. The first thing to watch for is a technician who calls the house without any advanced contact from you. Any company that contacts you and adversities a one price fits all service. Professional, trained, licensed and insured carpet cleaners will charge based on total area clean and the method used.

Also just because a professional carpet cleaner comes out and claims to use name brand products remember the credibility does not stand from the product used but by the services rendered. More importantly than the name brand products and chemicals used is the certifications help by the professional carpet cleaner.

When interviewing potential professional carpet cleaners it is best to invite them out. Most cleaners offer a free quote. During this time is the perfect time to pick him for information. One thing to ask would be how long that the business has been in service. This will give an idea if a reputation, good or bad, has been built within the community. This is easily scoped out by calling references and talking with the chamber of commerce in your area.

Another thing that you will want to find out is if the technician that is at the house to do the quote will also be the one servicing the carpet. Find out what type of training the technicians are sent through. It is important to ask if they will vacuum the carpet. All professional carpet cleaning service companies that provide reputable service will provide a thorough vacuuming job on the carpet before cleaning is started.

The lowest quote is not always the best quote. It is important that research is done, qualifications are looked at and the credentials examined before service is performed. It is important that homeowners make sure to show the professional carpet cleaner areas, spots and pet stains that need extra attention. It is important that homeowners wait for the carpet to dry completely before walking on it or putting furniture back on to avoid staining.

Prevention is better than cure; if you want to take some preventive measures then you can easily treat the accumulation of ice to manage the overall condition. There are thousands of companies who are actually managing the ice removal process any how. In fact, it is better that you do not demoralize the importance of managing the snow.

The asphalt and the concrete are two areas where snow hits very hard and makes it very complicated to win over the situation. When the temperature goes below freezing degrees then it will viciously damage the area by making it unnecessarily slippery.

You can treat the snow management with all surface works:

You may go for a salt solution, which is a liquid that helps in the snow melting. In fact, it is true that when you are subjecting all these chemicals into snow, then snow treatment becomes easier. All these factors and different chemicals are giving you an idea of best moisture absorbing formula for the hard rocky snow.

If you want to use the scientific formula then Eutectic temperature is the best managing option. This involves mixing the particular temperature of ice with the deicer solution. When you are subjecting a product to deice then it is better to treat it in the lowest temperature available.

You must analyze the melting point of a particular subject. When you already know the chemical combination of a substance then it will be easier to melt by simply calculating its melting point.

For clearing snow anti-icing is a great option. The rationale behind it is to clear the ice whenever the snowstorm hits. In fact, you need to be aware of the snow falling time so that you can be ready for it. If you do not let the ice to stand then normally it will not become hard for removal at the end.